Ryobi Light Flashing/Blinking (Red, Green, Orange Or Yellow)
If you’ve planned to invest in wireless tools, you’ve already entered a new phase of convenience. Cordless tools offer greater mobility and ease in performing day-to-day tasks on the go.
Rechargeable batteries, for instance, give you the freedom to run your devices without connecting them to a cord. However, you’d need a charger to power your batteries by the end of the day.
Homeowners using Ryobi batteries purchase a charger along the battery pack. While it offers optimal performance in charging the batteries, buyers run into problems frequently.
A few, for instance, have shown concern regarding the flashing LED lights on the charger. This guide will answer your queries if you’re in the same boat.
What Are Ryobi Battery Chargers?
Ryobi is a popular brand that designs featured power tools and outdoor items. Millions of homeowners consider it a credible brand and prefer it when purchasing everyday tools.
The company also sells rechargeable batteries, and many individuals purchase them to power their gadgets. While the battery offers the freedom to use devices cordlessly, it comes with a charger that comprises a wire.
Of course, you’d need a stable connection to charge your batteries and the Ryobi charger caters to your needs.
The charger features Light Emitting Diodes, popularly called LEDs. These lights tell you about your charger’s status and if there’s something wrong with the equipment.
For example, the Ryobi charger might flash red, orange, green, or yellow lights. Each blinking light signals something, and you need to understand it to take action accordingly.
However, note that not all blinking lights signify an underlying issue; a few merely indicate your Ryobi charger is powering the batteries successfully. Others, however, might need your attention.
Ryobi Battery Charger Flashing Green
To begin with, let’s look at the most common flashing light: Green.
If your battery charger is blinking green light, it’s not a cause of concern. It simply means your battery pack is charging.
So as soon as you insert the charger, you’ll likely see a green light on your device, and it’s perfectly normal.
However, you may stumble upon two types of green lights: flashing and solid. Both signify a different thing, but they are safe nonetheless.
A flashing green light means that the batteries are charging. On the flip side, a stable or solid green light signifies a fully charged battery pack. You can now remove the charger and use the batteries.
Ryobi Battery Charger Flashing Red
Typically, three reasons contribute to a flashing red light:
- Your battery is too cold or incredibly hot
- Inserting an abnormal charger might cause the charger to blink red. An abnormal charger simply means your battery doesn’t match the charger specifications. It can also signify that the battery type is wrong or the battery is faulty.
- The red light may blink for a moment when you place the battery into the charger.
You can figure out a battery’s temperature by touching it. We’re all aware that the charging process produces heat, and there’s not much you can do about it.
However, it shouldn’t generate heat more than the required amount. If it does, there’s an underlying problem.
Your battery should be warm to the touch, not flaming hot.
That said, ensure you do not insert a hot battery into the charger. It may ruin the battery and damage the charger.
If that doesn’t happen, your battery’s life expectancy will reduce. So either way, you’ll deteriorate your battery.
Luckily, a flashing LED light is enough to signal an underlying problem, allowing you to take action immediately.
Slow Flashing Red Light
You might assume that a red light slowly flashing means something else. However, it signifies the same issue discussed previously. A red light slowly blinking indicates unusual battery temperature fluctuations.
A common solution for this problem is taking the battery out. Then, wait for a couple of minutes until the temperature gets normal. Once the battery returns to its average temperature, insert it for recharging.
If the battery has been in use for long hours, wait a few hours before charging it. Further, a discharged battery might cause the problem, but there’s no simple way out.
Why? Because the charger takes the battery as dead.
However, here’s how you can go about the process.
Use a Healthy Battery
To begin with, you’d need a second healthy battery to proceed with the process.
- Attach the discharged battery to the healthy one
- Link the negative battery terminal to the negative side and the positive one to the positive battery terminal.
- Wait for a couple of minutes before inserting the battery into your Ryobi charger.
Insert the Battery Into the Ryobi Charger
This won’t be your typical charging process. So, you’ll insert the battery into the charger and take it out after a few seconds. Repeat the process for 20-30 minutes to awaken the battery.
Hook Up the Battery to DC Power Supply
Attach the battery to an active power supply. However, ensure that the voltage is optimal. Connect the positive battery terminal to the positive side and negative to the corresponding side, respectively.
Maintain this connection for some minutes before placing your battery into the charger. If the battery doesn’t charge after everything you’ve done so far, and the charger still flashes red, it’s time to use a multimeter.
A multimeter will allow you to ensure your battery is healthy. If you’re unsure how to use it, consider taking your battery to an expert. A professional will check and immediately inform you what’s wrong with the battery.
If you realize your battery is dead, better replace it instantly. Otherwise, the red light will continue to blink. Even worse, your battery will deteriorate, and the charger might get damaged.
Ryobi Battery Charger Flashing Orange
Typically, a Ryobi charger blinks red or orange light. So, if you saw orange light, you might have confused it with the red one.
However, gadgets can behave unexpectedly at times, and you may have seen orange LED to begin with. If that’s the case, it simply means your battery isn’t charging. You can always check the battery’s health by evaluating its performance with a tester.
If you conclude the battery is unhealthy or dead, it’s time to consider a replacement.
Ryobi Battery Charger Flashing Yellow
Some Ryobi chargers flash a yellow light when charging the battery. However, the blinking light becomes stable once the battery is fully charged.
So, a solid yellow light isn’t a cause of concern. It simply means your batteries are powered up optimally. The flashing light, however, is a problem in a few cases.
For instance, it may indicate a defective charger or an incredibly hot battery. You can always check the instruction manual to confirm what’s wrong.
Charger Flashing Red & Green
Blinking red and green lights signal a defective battery. You might also see the combination of both lights when your battery is overcharged.
Nonetheless, you can fix this issue by taking out the battery and re-inserting it. If you think the battery was overcharged, you can awaken it by connecting it to a supply with a second, healthy battery.
This would require you to insert the battery for a few seconds and take it out. Repeat it for 30 minutes until the battery wakes up.
Why Is the Charger Not Displaying Green Light?
Where flashing green light becomes worrisome, a few homeowners show concern when it doesn’t blink – because it is something to be concerned about.
A green light signifies your battery is charging optimally. If, however, you cannot see the green light, consider checking the connection.
Make sure that the charger is properly connected to the power source. Further, you can also check for defects in the wire; a malfunctioning charger wire might be the culprit.
If you see red light instead of the green one, your battery is extremely cold or incredibly hot. This can be troublesome as it may damage the battery or the charger. At this point, you’d need to remove the battery, let it reach its normal temperature, and re-insert it.
As a rule of thumb, avoid charging your battery in extremely hot temperatures. During scorching summer days, we recommend charging your batteries in air conditioning.
The same goes for ice-cold temperatures. If you’re situated in cold regions, consider warming your room before charging the battery.
Ryobi Battery Flashes Repeatedly
A few homeowners complain their Ryobi battery flashes 4 times. The thing is, the number of flashes does not matter. What does make a difference is the color of light.
- You’ll see a red LED as soon as you connect the charger. This light displays when you haven’t inserted a battery into the charger. The red light will remain stable unless you place the battery.
- A stable green light signifies your battery is fully charged; it’s time to remove the battery and disconnect the charger.
Ryobi Battery Charger Doesn’t Display Any Light.
No LED light on your charger means it’s not working. Ryobi products have a reputation for their optimal performance and extended life.
Therefore, no lights rarely indicate a malfunctioning charger. Instead, this problem typically arises when the charger isn’t properly connected to a power supply.
At this point, you need to check if the charger is correctly inserted into the socket. A stable connection will light up your charger, providing an optimal supply to charge the batteries.
You can also fix this problem by checking the terminals for dirt and debris. Dirt hidden in the terminals can keep your batteries from charging.
Besides, ensure you secure the battery firmly in the slot. Improper placement will not charge your batteries.
If nothing seems to work, it’s time to take the charger to a professional technician. They’ll pull the charger apart to detect an underlying issue. Although Ryobi chargers have an extended lifespan, they do not function forever. So, you’d need to buy a new one or fix the old one.
If, however, you run into this issue during the warranty period, we encourage you to take advantage and contact the company before it’s too late.
What Would Cause Ryobi Batteries to Fail?
Your carelessness can fail the Ryobi battery sooner than expected. It becomes challenging to run the battery once it enters sleep mode. This generally happens when the battery is used till it becomes dead.
Then, you store it for a long time without charging it. When this happens, the charger isn’t robust enough to start the battery and breathe life into it.
As such, you’ll see flashing red and green lights when trying to charge the battery. Therefore, make sure you follow the best practices and take care of battery needs to keep it healthy.
How to Fix Rusted Battery Terminals?
Corroded metal contacts of charger or battery can cause problems. You’ll fail to charge the battery and might assume there’s a hidden problem.
However, that’s not the case; the rusted terminals are the only culprit. You can always remove corrosion with a sandpaper piece.
Further, we recommend cleaning the terminals with a brush or alcoholic wipe. The cleaner the charger, the more efficiently it’ll charge the battery.
Where to Buy a Ryobi Battery Charger?
Whether you’re looking for Ryobi replacement tools or a charger, consider heading straight to the official Ryobi website. You’ll easily find all the components. However, this solution is for those who are in a hurry.
If you have enough time and desire to save some money, we recommend buying from the ecommerce giant Amazon. The marketplace has a considerable collection of Ryobi chargers and batteries.
You’ll also find Ryobi products on third-party marketplaces. However, you may end up purchasing a bogus product with a fake label. Therefore, we suggest considering reputable sources.
Wrap Up
Ryobi battery charges give you the convenience you need to keep pace with your busy schedule. It allows you to recharge the Ryobi batteries efficiently.
However, you might see yellow, orange, red, or green light blinking on the charger. Not all LED lights need to be addressed; however, a few require action on your behalf.
We discussed numerous light colors, what they mean, and how you can resolve the issue. If nothing seems to work, it’s time to take your equipment to a technician.
