Key fobs are an accessory you should never be without, particularly if you own a Chevy. If the Chevy key fob is slow to respond, it may require batteries, and new batteries mainly guarantee the proper functioning of the key fob. This article will teach you how to replace a dead key fob battery.
Types of Chevy Key fob
Chevy has three different types of key fobs based on the model of the car. Here are the kinds of chevy key fobs:
- Chevrolet Smart Keyless Entry Remote is used in newer Chevrolet cars.
- Chevrolet Flip Key fob is typical in many Chevrolet models, such as the Camara, Cruze, Equinox, Volt, and others from 2010 to 2016.
- Chevrolet Key Fob Remote is a popular Chevy key fob used in models like the Suburban, Tahoe, Traverse, Silverado, and others.
Signs you need to change your Chevy Key fob battery
The battery in the Chevrolet key fob can last up to 2 years before it needs replacing. However, the battery life of your key fob is determined by its age and how frequently you use it. Here are some signs to keep an eye out for to help you figure out whether it’s time to replace your battery:
- There is no response when the key fob buttons are pressed
- The key fob is not opening the car door up close
- The trunk will not open from afar.
- The fob transmitting range decreases
The kind of battery Chevy Key fob uses
All the different types of the Chevy key fob use the CR2032 3V button battery. The battery is pretty standard since it is used widely for many applications, and it can be gotten online, in auto repair shops, and in different marts and convenience stores.
- BITTER TASTE DISCOURAGES SWALLOWING – Duracell Lithium Coin batteries are the only batteries with a non-toxic, bitter coating to help discourage swallowing
- CHILD-SECURE PACKAGING makes Duracell Lithium Coin battery packaging nearly impossible to open without scissors
- LONG-LASTING BATTERIES DESIGNED FOR DEPENDABILITY – Duracell Lithium Coin Batteries deliver the long-lasting power and performance you can count on for electronic devices throughout the home or on-the-go
- RELIABLE POWER – The Duracell 2032 3V Lithium Coin battery powers both everyday and essential home devices, including key fobs, remote controls, glucose monitors, thermometers, and many more
- GUARANTEED FOR 10 YEARS IN STORAGE – Holds power up to a decade in storage, so you can be confident these batteries will be ready when you need them
Steps to replace a Chevy Key fob battery
Different chevy key fob has different ways of changing their batteries. below are the ways the different chevy key fob batteries can be changed:
Chevrolet Smart Keyless Entry Remote
- Remove the keys and the circuit board by gently prying the key fob with a flat head screwdriver. Place these two parts in a secure location.
- Remove the old battery with a little flathead screwdriver and carefully dispose of it.
- Put a fresh CR2032 3V battery in for the old one. Check that the positive side of the new battery is connected to the positive side of the old battery.
- Snap the lid back on and replace the circuit board and buttons in their proper locations. Ensure that both sides are securely fastened.
- Test your key fob if it works perfectly
Chevrolet Flip Key fob
- press the side chrome button to remove the metal key.
- Gently remove the key fob’s rear lid cover to reveal the battery compartment.
- Using your fingernail or a little screwdriver, remove the old battery. If you’re going to use a screwdriver, be sure you don’t harm anything on the key fob.
- Insert a new CR2032 3V lithium battery and ensure it’s aligned correctly.
- Replace the lid cover and snap it close. To check that the battery change was successful, test the key fob.
Chevrolet Key Fob Remote
- Using a flat head screwdriver, pry the key fob open. The screwdriver can be inserted into a small slit on the side of the key fob.
- To open the key fob cover, twist the screwdriver.
- Slide the battery out of the way.
- Replace the battery with the new one. Keep an eye on the battery’s positive (+) side.
- close it by pressing the key fob casing together until it snaps
How to Program a Chevy Key fob
The programming of a chevy key fob is easy and can be done in 5 minutes of the model of chevy you are using. Below is the guide on how to pair the key fob to the vehicle:
- Manually unlock your doors using your Chevy key.
- Enter the car and place the key in the ignition once all of the doors have been closed.
- On the driver’s side door, press and hold the unlock button. Ensure that your key is turned on. The engine will remain turned off while the electronics are turned on.
- Turn the key to the off position. turn it to “On” and then to “Off.”
- Remove your hand from the unlock button.
- Your Chevy key fob programming is ready to begin if you notice the door locks click and disengage.
- Press the “Lock” and “Unlock” keys down. At the exact moment. Your programming has been effective if you hear the door locks click and disengage
- Insert your key in the starter and turn it to the “on” position to finish setting up.
Chevy key fobs are pretty helpful. They rely on button cell batteries, which aren’t indestructible. Changing the battery in a key fob should take 5 minutes if you have the right tools. To make your key fob work properly, ensure you have the correct battery. Take your key fob to a dealer for service if it isn’t working, especially if you’ve just replaced the battery. They’ll be able to figure out what’s wrong and get it fixed.